This project is read-only.

Socket Type Z

Manufacturer specific. The pinout for this socket will vary between mainboards. Please refer to the individual mainboard's documentation for details.

Pinout

Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8 Pin 9 Pin 10
+3.3V +5V [MS] [MS] [MS] [MS] [MS] [MS] [MS] GND


Legend:

GPIO

A general-purpose digital input/output pin, operating at 3.3 Volts.

! Interrupt-capable and software pull-up capable GPIO (the pull-up is switchable and in the range of 10,000 to 100,000 ohms).

[MS]

A manufacturer-specific pin. See the documentation from the manufacturer of the mainboard.

+3.3V Connection to the +3.3V power net.
+5V Connection to the +5V power net.
GND Connection the power ground net.

Connector Pin Numbering

Pins numbers for the male 10-pin connector standard Gadgeteer socket, as seen from above. In most cases, the ribbon cables will have the pin 1 conductor marked in red.

ConnectorPinNumbering_thumb_thumb_thumb_thumb_thumb_thumb_thumb_thumb_thumb_thumb_thumb

Last edited Nov 10, 2011 at 3:40 PM by nvillar, version 2

Comments

No comments yet.