Socket Type R
Display (LCD) interface, carrying the red component on pins 3 to 7, as well as the VSYNC line on pin 8 and the HSYNC line on pin 9.
Pinout
| Pin 1 |
Pin 2 |
Pin 3 |
Pin 4 |
Pin 5 |
Pin 6 |
Pin 7 |
Pin 8 |
Pin 9 |
Pin 10 |
|
+3.3V |
+5V |
LCD R0 |
LCD R1 |
LCD R2 |
LCD R3 |
LCD R4 |
LCD VSYNC |
LCD RSYNC |
GND |
Legend:
| LCD |
An LCD signal pin. |
| +3.3V |
Connection to the +3.3V power net. |
| +5V |
Connection to the +5V power net. |
| GND |
Connection the power ground net. |
Connector Pin Numbering
Pins numbers for the male 10-pin connector standard Gadgeteer socket, as seen from above. In most cases, the ribbon cables will have the pin 1 conductor marked in red.
