Socket Type G

Display (LCD) interface, carrying the green component on pins 3 to 8, as well as the backlight control line on pin 9.

Pinout

Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8 Pin 9 Pin 10
+3.3V +5V LCD G0 LCD G1 LCD G2 LCD G3 LCD G4 LCD G5 LCD BACKLIGHT GND


Legend:

LCD An LCD signal pin.
+3.3V Connection to the +3.3V power net.
+5V Connection to the +5V power net.
GND Connection the power ground net.

Connector Pin Numbering

Pins numbers for the male 10-pin connector standard Gadgeteer socket, as seen from above. In most cases, the ribbon cables will have the pin 1 conductor marked in red.

ConnectorPinNumbering_thumb_thumb_thumb

Last edited Nov 10, 2011 at 3:38 PM by nvillar, version 3

Comments

No comments yet.